Inneal Molltair In-stealladh Rubair Foam Lìnearach E266UP DRAGON266U
Iomradh Teicnigeach
| Neach-gleidhidh Molltair | Àir. | 2 | 6 | 8 | 10 | ||||
| Feachd gleusaidh molltair | KN | 2000 | ||||
| STRÒC FOSGLAIDH A' MHULLAID | mm | 350 | ||||
| TOMHASAN A’ PHLAIT TEASACHAIDH | mm | 580x550 | ||||
| Àirde Molltair Àbhaisteach | mm | 105-330 | ||||
| ÀIRDE AN INJEACSADH | mm | 60 | ||||
| PASGAIDH EADAR CHOLBHAIN | mm | 605 | ||||
| Astar eadar ionadan in-stealladh | mm | 240/290 | ||||
| CUMHACHD TEASACHAIDH A’ PHLAIT | KW | 6, 7 | ||||
| AONAD INJEACSADH | ||||||
| ÀIREAMH NAN AONADAN INJEACSADH | Àir. Is | 2 (1 gach rann 2 staz.) | ROGHAINN | |||
| Trast-thomhas an sgriubha | mm | 60 | 75 | |||
| Sgriothan L/D L/DDELA VIS | — | 19 | ||||
| MEUD AN INJEACSADH | cm | 900 | 1400 | |||
| BRÙTHADH INJEACSADH | Bàr | 1065 | ||||
| LUAS SGRIÙB | rpm | 0-140 | 0 + 140 | |||
| Astar In-stealladh | cm3/diog | 230 | 700 | |||
| TORQUE SGRIÙB (as àirde) | DaNm | 160 | 160 | |||
| SÒNAN TEASACHAIDH | Àir. | 4 | 4 | |||
| CUMHACHD AIR A STÀLADH | ||||||
| AONADAN INJEACSADH TEASACHADH | KW | 10.5 | 10.5 | 10.5 | 10.5 | |
| INJEACTOR GLUASAD MOTAIR | KW | 1.5 | 1.5 | 1.5 | 1.5 | |
| Plàtaichean teasachaidh | KW | 26.8 | 80.4 | 107.2 | 134 | |
| MOTOR AONAD HIDRAULAIGEACH | KW | 48.6 | 48.6 | 48.6 | 48.6 | |
| PUMP FALAMHACH | KW | 2.2 | 2.2 | 2.2 | 2.2 | |
| CUMHACHD IOMLAN AIR A STÀLADH | KW | 89.6 | 143.2 | 170 | 196.8 | |
| CAITHEAMH CUIBHEASACH | ||||||
| LÙTH DEALANACH | kWh | 20 | 44 | 55 | 76 | |
| ADHAIR | NL/mion | 100 | 100 | 100 | 100 | |
| AONADAN FUARACHAIDH | frids/uair Frids | 16000 | 21000 | 27000 | 30000 | |
| CUIDEAM | ||||||
| CUIDEAM LÌON | Kg | 12600 | 23600 | 29044 | 34600 | |
| TOMHASAN | ||||||
| DOIMHNE | mm | 4500 | ||||
| Fad-B | mm | 4660 | 8500 | 10420 | 12340 | |
| FAD STÈISEANAN-C | mm | 1920 | 5760 | 7680 | 9600 | |
| ÀIRDE-H | mm | 2800 | ||||
Sgrìobh do theachdaireachd an seo agus cuir thugainn i